ABOUT
HOME
GENERAL
DECODE YOUR VIN
TECHNICAL SECTION
MORE
MORE
LIBRARY
SITE INDEX

Technical Drawings and Schematics - Section G
Drivetrain ( Transmission, Clutch, Transfer Case, etc.)
 
IMPORTANT NOTE - PLEASE READ FIRST!

The diagrams shown here are a tool to be used to find the appropriate part in the Master Parts Catalog (MPC). The numbers you will see on these diagrams are NOT part numbers! They are GROUP numbers, sometimes referred to as the Basic Part Number.  Armed with the Group Number, you can refer to the section in the MPC which includes this Group Number, which in turn will show a listing of all the parts that share this Group Number, and you need to choose the actual part number from this list, based on your needs, such as model year, specific application, color/style, etc.

Group Numbers for any vehicle part are all the same, regardless of it's actual application. For example, all Ford valve covers have a Group Number of 6582, regardless of application...meaning a  valve cover used on a 4-cyl. Pinto engine and a HD diesel truck engine would both share this Group Number. Once you look the Group Number up in the MPC, there were be a full listing of valve covers there, and it would be up to you to figure out which one you need, based on the vehicle and engine model year, painted or chrome, etc., and the final part number will be listed.  It's a part number's PREFIX and SUFFIX that denote the final application, size, style, color, revisions, etc.

For more detailed information, please visit How to Decipher FoMoCo Part Numbers - Overview at FORDification.com.



 

NOTE 1: In the '57-'63 MPC schematics, the applications listed might be confusing. Keep in mind that up through 1960, the models are often referred to (in some of the MPC schematics) as:

  • F100 - Model C
  • F250 - Model D
  • F350 - Model Y



 

NOTE 2: Model year application is indicated by showing the first year followed by a diagonal line to imply continued usage in all subsequent years until the insertion of the last year of usage which will then be inserted after the diagonal line. If no diagonal line is shown the part is applicable only to the year shown. Example:

  • 60/    indicates the part used 1960 through subsequent models
  • 60/63    indicates part used 1960 thru 1963 model years
  • 60    indicates part used 1960 model year only

The diagrams shown here were obtained from two different Master Parts Catalogs. One covers '57-'63, the other covers '64 thru '72. Listings from the '57-'63 MPC which show 60/ means the part was used from 1960 thru the end of the MPC model year coverage (1963), though the part might also be used in '64-later models. Alternatively, diagrams from the '64-'72 MPC which show an application range as '64-'66 might have also been used on earlier models. As a result, there might be multiple diagrams with the same part, one from each MPC.



 

 
Drive Line [Driveshaft] - Typical '57-'63 MPC
Section 46 Page 5
P-4187
1953/ Drive Shaft (3 Speed Heavy Duty and 4 Speed Transmission)
(Model C)

1953/ Drive Shaft (Fordomatic) (Model C)

'57-'63 MPC
Section 48 Page 2
P-1409
1956/ "Typical" Drive Shaft & Coupling Shaft
(Models D, J, JH, JL, Y, T, TH, THZ, W, WH, WHZ)
'57-'63 MPC
Section 48 Page 4
P-2012
1959/ Drive & Coupling Shafts (Models C - 118" W/B, D - 4WD) '57-'63 MPC
Section 48 Page 12
P-2843
1957/ Transmission Overdrive & Extension (Model C) '57-'63 MPC
Section 70 Page 408
P-2228
1957/ "Typical" Warner Gear Overdrive Transmission
(6 & 8 cylinder 223, 272, 292)
'57-'63 MPC
Section 70 Page 407
P-1914
1956/ Ford Transmission - 3 Speed Light Duty (Model C) '57-'63 MPC
Section 70.3 Page 411
P-2024
1957/ Warner Gear Transmission - (Warner Gear T89C & T89F)
3 Speed Medium Duty (Models C, D, J, JL)
'57-'63 MPC
Section 70.3 Page 314
P-2354
Transmission and Extension - 3 Speed (Ford) - Typical
1957/62 F100/250 (4x2), P350
'57-'63 MPC
Section 70.3 Page 410
P-3214
1963/ Truck & Econoline - 3 Speed Synchro Smooth Drive Transmission
(Ford 3.03)
'57-'63 MPC
Section 70.3 Page 415
P-4067
Transmission - 3 Speed (Warner Gear T87E & T87G) - Typical
1957/ F350, P350/500
'57-'63 MPC
Section 70.3 Page 414
P-1376
"Typical" Spicer Transfer Case - Four Wheel Drive '57-'63 MPC
Section 70 Page 409
P-2806
1956/ Transmission - 4 Speed Synchronized (Warner Gear T98-A) '57-'63 MPC
Section 70 Page 54
P-3929
1964 New Process (435) 4 Speed Synchro Helical Gear Transmission '57-'63 MPC
Section 70 Page 60
P-4231
1957/ F100/250 Transmission Gear Shift Column - Remote Control
3 Speed Light Duty and Medium Duty Transmissions (Models C & D)

 

'57-'63 MPC
Section 72 Page 456
P-2031
1957/ Transmission Gear Shift Column - Remote Control - 3 Speed Heavy Duty
(Model Y)
'57-'63 MPC
Section 72 Page 4
P-2360

Gear Shift Housing, Levers & Forks - 3 Speed - (Warner Gear T89C) - Typical
1957/ F100/250
'57-'63 MPC
Section 72 Page 9
P-2353
1953/ Transmission Gear Shift Housing, Levers, Forks, etc.
3 Speed Heavy Duty
'57-'63 MPC
Section 72 Page 10
P-1377
1961/ "Typical" Transmission Gear Shift Column
Ford-O-Matic & Cruise-O-Matic - (Models C, D)
'60-'64 Can. MPC
Sec. 71-72 Page 34
P-3594
Gear Shift Column - Remote Control - 3-Speed
1957/ F350
'57-'63 MPC
Section 72 Page 459
P-2360
1956/ "Typical" Transmission Gear Shift - 4 Speed Helical '57-'63 MPC
Section 72 Page 14
P-2059
1962 New Process Medium Duty Transmission Gear Shift '60-'64 Can. MPC
Sec. 71-72 Page 32
-
Transfer Case Shift Controls & Supports - Four Wheel Drive
1959/ F100 4x4, 1959/ F250 4x4
'57-'63 MPC
Section 72 Page 22
P-2842
1961/ "Typical" Mechanical Clutch and Related parts (Conventional Cab) '57-'63 MPC
Section 75 Page 14
P-3585
"Typical" Short Extension Housing & Parking Brake Drum
(Fordomatic & Cruise-O-Matic Transmission)
'57-'63 MPC
Section A70 Page 1
P-2939
"Typical" Gears, Shafts and Related Parts (Fordomatic Transmission) '57-'63 MPC
Section A70 Page 2
P-1886
"Typical" Gears, Shafts & Related Parts (1959/ Cruise-O-Matic Transmission) '57-'63 MPC
Section A70 Page 3
P-2940
1964 Gear Train (C4 Automatic Transmission) '60-'64 Can. MPC
Section A70 Page 4
P-4327
"Typical" Front Servo & Band (8 Cylinder 292 - Single & Dual Range Automatic)

"Typical" Rear Servo and Band (Single and Dual Range)
'60-'63 Can. MPC
Section 70C Page 7
"Typical" Main Control - Single Range Automatic

"Typical" Oil Pressure Regulator (Single and Dual Range)
'60-'63 Can. MPC
Section 70C Page 8
P-1876/P-1725
"Typical" Parking Pawl Linkage Throttle and Manual Control Levers
(Fordomatic Transmission
'57-'63 MPC
Section A73 Page 1
P-1141
"Typical" Front Servo & Band 272 - 1958 Model JH Fordomatic
(1958/ 8 Cylinder 292 - Fordomatic & Cruise-O-Matic Transmissions)

 

1958/ "Typical" Rear Servo and Band
(Fordomatic and Cruise-O-Matic Transmissions)

'57-'63 MPC
Section A73 Page 5
P-2578/P-2562
1964 Parking Pawl Linkage Throttle and Manual Control Levers
(C4 Automatic Transmission)
'57-'63 MPC
Section A73 Page 6
P-4330
1964 Front Servo and Band (C4 Automatic Transmission) '57-'63 MPC
Section A73 Page 7
P-4328
1964 Rear Servo and Band (C4 Automatic Transmission) '57-'63 MPC
Section A73 Page 8
P-4329
"Typical" Case, Extension Housing & Related Parts (Fordomatic Transmission) '57-'63 MPC
Section A76 Page 1
P-1871
"Typical" Converter & Related Parts
(Fordomatic Transmission) - with Aluminum Impeller
'57-'63 MPC
Section A76 Page 2
P-1504
1958/ "Typical" Converter & Related Parts
(Fordomatic & Cruise-O-Matic Transmissions)
'57-'63 MPC
Section A76 Page 4
P-2726
1959/ Main Control (Cruise-O-Matic Transmission) '57-'63 MPC
Section A76 Page 6
P-2583
1956/ "Typical" Transmission Oil Cooler (Fordomatic Transmission) '57-'63 MPC
Section A76 Page 8
P-2042
1964/ Case, Extension Housing & Related Parts (C4 Automatic Transmission) '57-'63 MPC
Section A76 Page 9
P-4426

 

 

PAGE IN PROGRESS - MORE TO COME VERY SOON!

 

 

 

 

Copyright 2016-2017 FORDification.info unless otherwise noted. All rights reserved.
All brand names and product names used on this website are trade names, service marks or registered trademarks of their respective holders.
No portion or content of this site may be reproduced or otherwise used without explicit permission.
To report problems or provide comments or suggestions, please click here.