ABOUT
HOME
GENERAL
DECODE YOUR VIN
TECHNICAL SECTION
MORE
MORE
LIBRARY
SITE INDEX

Technical Drawings and Schematics - Section E
Engine and Related Components
 
IMPORTANT NOTE - PLEASE READ FIRST!

The diagrams shown here are a tool to be used to find the appropriate part in the Master Parts Catalog (MPC). The numbers you will see on these diagrams are NOT part numbers! They are GROUP numbers, sometimes referred to as the Basic Part Number.  Armed with the Group Number, you can refer to the section in the MPC which includes this Group Number, which in turn will show a listing of all the parts that share this Group Number, and you need to choose the actual part number from this list, based on your needs, such as model year, specific application, color/style, etc.

Group Numbers for any vehicle part are all the same, regardless of it's actual application. For example, all Ford valve covers have a Group Number of 6582, regardless of application...meaning a  valve cover used on a 4-cyl. Pinto engine and a HD diesel truck engine would both share this Group Number. Once you look the Group Number up in the MPC, there were be a full listing of valve covers there, and it would be up to you to figure out which one you need, based on the vehicle and engine model year, painted or chrome, etc., and the final part number will be listed.  It's a part number's PREFIX and SUFFIX that denote the final application, size, style, color, revisions, etc.

For more detailed information, please visit How to Decipher FoMoCo Part Numbers - Overview at FORDification.com.



 

NOTE 1: In the '57-'63 MPC schematics, the applications listed might be confusing. Keep in mind that up through 1960, the models are often referred to (in some of the MPC schematics) as:

  • F100 - Model C
  • F250 - Model D
  • F350 - Model Y



 

NOTE 2: Model year application is indicated by showing the first year followed by a diagonal line to imply continued usage in all subsequent years until the insertion of the last year of usage which will then be inserted after the diagonal line. If no diagonal line is shown the part is applicable only to the year shown. Example:

  • 60/    indicates the part used 1960 through subsequent models
  • 60/63    indicates part used 1960 thru 1963 model years
  • 60    indicates part used 1960 model year only

The diagrams shown here were obtained from two different Master Parts Catalogs. One covers '57-'63, the other covers '64 thru '72. Listings from the '57-'63 MPC which show 60/ means the part was used from 1960 thru the end of the MPC model year coverage (1963), though the part might also be used in '64-later models. Alternatively, diagrams from the '64-'72 MPC which show an application range as '64-'66 might have also been used on earlier models. As a result, there might be multiple diagrams with the same part, one from each MPC.



 

 
1956/ "Typical" Exhaust System (8 cylinder)
(Models C, D, Y, T, TH, W, WH)
'57-'63 MPC
Sec. 52 Page 7
1961/ Exhaust System (6 & 8 cyl.)
Models Y, T, TH (Q, Z Except for School Bus)
#QH, QH, W, WH, QW, Z, W (except 401, 477, 534)
'57-'63 MPC
Sec. 52 Page 15
1961/ Exhaust System (6 & 8 cyl.) - Models C and D '57-'63 MPC
Sec. 52 Page 16
1962/ Exhaust System
(F350/800, B500/600, N500/750, T700/800, C550/800)
'57-'63 MPC
Sec. 52 Page 22
1964 Exhaust System
(F350/800, N500/750, T700/800, C550/800, CT750/800)
8 cyl. 292, 330, 361, 391
'57-'63 MPC
Sec. 52 Page 24
"Typical" 6 cylinder 223 "O.H.V." Engine '57-'63 MPC
Section 60 Page 4
"Typical" 8 cylinder 239, 256, 272 & 292 "O.H.V." Engines '57-'63 MPC
Section 60 Page 12
"Typical" Cylinder Block & Related Parts (6 Cylinder 223 "O.H.V." Engine) '57-'63 MPC
Section 60 Page 19
1957/61 Engine Front Support (6 cylinder) '57-'63 MPC
Section 60 Page 33
1961/  6 cylinder 262 "O.H.V." Engine - "Typical" '57-'63 MPC
Section 60 Page 42
1961/ "Typical" Engine Front Supports (Models C, D - except 4WD) '57-'63 MPC
Section 60 Page 43
1961/  "Typical" Engine Rear Support (Models C, D, Y, T, TH) '57-'63 MPC
Section 60 Page 44
"Typical" Piston and Connecting Rod
(6 & 8 cylinder 223, 239 and 256 "O.H.V." Engines
'57-'63 MPC
Section 61 Page 2
"Typical" Piston and Connecting Rod
(8 cylinder 272, 292, 302 & 332 "O.H.V." Engines)
'57-'63 MPC
Section 61 Page 3
Camshaft, Gear, Bearings, etc. (6 cylinder 223 "O.H.V." Engine) '57-'63 MPC
Section 61 Page 4
"Typical" Camshaft, Gear, Bearings, etc.
(8 cylinder 239, 256, 272 & 292 "O.H.V." Engines

 

1956/ "Typical" Camshaft, Gear, Bearings, etc.
(8 cylinder 272 & 292 H/D "O.H.V." Engines)

'57-'63 MPC
Section 61 Page 5
"Typical" Crankshaft, Flywheel & Related Parts (6 cylinder 223 "O.H.V." Engine) '57-'63 MPC
Section 63 Page 2
"Typical" Crankshaft, Flywheel & Related Parts
(8 cylinder 272 & 292 "O.H.V." Engines)
'57-'63 MPC
Section 63 Page 6
"Typical" Valves, Push Rods, Rocker Arm Cover and Related Parts
(6 cylinder "O.H.V." Engines
'57-'63 MPC
Section 65 Page 3
Valves, Push Rods, Rocker Arm Covers and Related Parts
(8 cylinder 239, 272 & 292 "O.H.V." Engines)
'57-'63 MPC
Section 65 Page 4
Valves, Push Rods, Rocker Arm Cover and Related Parts
(8 cylinder 256, 272 & 292 Heavy Duty "O.H.V." Engines)
'57-'63 MPC
Section 65 Page 5
"Typical" Oil Pump (Gear Type) & Related Parts (8 cylinder "O.H.V." Engines)

 

"Typical Oil Pump, Pan & Related Parts (6 cylinder "O.H.V." Engines)

'57-'63 MPC
Section 66 Page 3
"Typical" Oil Pump (Rotor Type) '57-'63 MPC
Section 66 Page 4
Oil Filter Fittings

"Typical Oil Filter and Related Parts ("O.H.V." Engines)

Disposable ("Spin-On") Type Oil Filter

'57-'63 MPC
Section 66 Page 13
"Typical Oil Pump (Rotor Type - 6 Cylinder 223, 262 "O.H.V." Engine) '57-'63 MPC
Section 66 Page 18
1961/63 Crankcase Vent System (6 cylinder 144, 170, 223, 262 Engines)
Emission Reduction Control
'57-'63 MPC
Section 66 Page 19
1961/64 Crankcase Vent System (8 cylinder 292 Engine)
Emission Reduction Control
'57-'63 MPC
Section 66 Page 21
1963/ Crankcase Vent System (6 cylinder 144, 170, 223, 262 Engines)
Emission Reduction System
'57-'63 MPC
Section 66 Page 22
1964 Crankcase Vent System - Rocker Arm Cover Type
(6 cylinder 144, 170, 200, 223 & 8 cylinder 292, 330, 361, 391 Engines)
Emission Reduction Control - Typical
'57-'63 MPC
Section 66 Page 23
1954/ "Typical" Water Pump (6 Cylinder 223 Engines) '57-'63 MPC
Sec. 85 Page 1
1954/ "Typical" Water Pump (8 Cylinder 239, 272, & 292 Engines) '57-'63 MPC
Sec. 85 Page 4
1961/ Water Pump (6 Cylinder 262 Engine) '57-'63 MPC
Sec. 85 Page 6


NOTE: When assembling these schematics, for the first half of the MPC (up through Section 85), a consolidated version of the text and illustrations was used, where the text and illustrations were assembled together. From Section 90 on, a different MPC was used that had the text and illustrations separated into separate individual volumes. Therefore, the page numbers as reported from this point on reflect this.
 

Fuel System and Related Parts - (In-Cab Tank) - Typical
1957/ (6 Cyl. 223, 262 & 8 Cyl. 272, 292, 302, 332 Engines) - F & T Series
'57-'63 MPC
Sec. 90 Page 619
Fuel System and Related Parts
(18 & 30 Gallon Frame Mounted Fuel Tanks) - Typical
1959/62 (6 Cyl. 223, 262 & 8 Cyl. 292, 302, 332 Engines) - B500/750, C550/600, F350/750, T700
'57-'63 MPC
Sec. 90 Page 620
Valve Assy. - (Exhaust Thermostat Control with Arm Type Counter Weight) - Typical
1957/63 (8 Cyl. 272, 292 Engine)
'57-'63 MPC
Sec. 90 Page 639
Valve Assy. - (Exhaust Thermostat Control with Wheel Type Counter Weight - Typical
1957/63 (8 Cyl. 272, 292 Engine)
'57-'63 MPC
Sec. 90 Page 639
Exhaust Manifold and Related Parts - Typical
1957/ (6 Cyl. 223 Engine)
'57-'63 MPC
Sec. 90 Page 640
Fuel Pump - (A-C)
1957/63 (6 Cyl. 223 & 8 Cyl. 272, 292 Engines)
1961 (6 Cyl. 144, 170 Engines)
'57-'63 MPC
Sec. 90 Page 642
Fuel Pump - (A-C)
1961 (6 Cyl. 262 Engine)
'57-'63 MPC
Sec. 90 Page 643
Fuel Pump - Carter
1961/63 (6 Cyl. 262 Engine)
1962/63 (8 Cyl. 302, 332 Engine)
'57-'63 MPC
Sec. 90 Page 644
Fuel and Vacuum Pump - 1957/62 (8 Cyl. 272, 292 Engines) '57-'63 MPC
Sec. 90 Page 645
Fuel Pump and Filter Assembly - Carter
1963/ (8 Cyl. 292, 302 Engines)
'57-'63 MPC
Sec. 90 Page 647
Carburetor - Holley - 1 Barrel
1963/ (6 Cyl. 144, 170, 223, 262 Engines)
'57-'63 MPC
Sec. 90 Page 656
Carburetor - Holley - 1 Barrel
1958/62 (6 Cyl. 223 Engine)
'57-'63 MPC
Sec. 90 Page 658
Carburetor - Ford - 1 Barrel
1963/ (6 Cyl. 223, 262 Engines)
'57-'63 MPC
Sec. 90 Page 659
Carburetor - Holley - 1 Barrel
1961/63 (6 Cyl. 262 Engine)
'57-'63 MPC
Sec. 90 Page 660
Carburetor - Holley - 2 Barrel
1960/62 (8 Cyl. 292 Engine)
'57-'63 MPC
Sec. 90 Page 665
Carburetor - Ford - 2 Barrel
1963/ (8 Cyl. 292 Engine)
'57-'63 MPC
Sec. 90 Page 666
Carburetor - Holley - 4 Barrel
1959/ (8 Cyl. 292 Engine)
1959/ (8 Cyl. 302-323 Engines)
1963 (8 Cyl. 302-332 Engines)
'57-'63 MPC
Sec. 90 Page 667
Air Cleaner (Oil Bath Type)
1957/ (6 Cyl. 223, 262 Engines)
'57-'63 MPC
Sec. 90 Page 675
Accelerator & Transmission Linkage
1961/ (6 Cyl. 223 Engine with F/M or C/M) - F100/350
'57-'63 MPC
Sec. 90 Page 693
Accelerator Linkage - Typical
1960/ (6 Cyl. 223 Engine with M/T) - B500/600, F100/600
'57-'63 MPC
Sec. 90 Page 698
Accelerator Linkage
1961/ (8 Cyl. 292, 302, 332, 401, 477, 534 Engines with M/T) - B-F-T
'57-'63 MPC
Sec. 90 Page 702
Accelerator & Transmission Linkage
1961/ (8 Cyl. 292 Engine with F/M or C/M) - F100/350
'57-'63 MPC
Sec. 90 Page 703

 

Copyright © 2016-2017 FORDification.info unless otherwise noted. All rights reserved.
All brand names and product names used on this website are trade names, service marks or registered trademarks of their respective holders.
No portion or content of this site may be reproduced or otherwise used without explicit permission.
To report problems or provide comments or suggestions, please click here.